Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Ford Focus pressure sensor

Model: Ford Focus MK 4 - Years 2018-2025
Part:

In this video, we see how to reset the TPMS light on the Ford Focus. This light comes on if the pressure in one or more tires drops below 25% of the recommended value, so the first thing to do is to check the tire pressure, comparing it with the recommended value from the Manufacturer, indicated on the label stuck on the driver's door. Turn on the instrument panel: the reset button is located on the steering wheel (or in the center console, depending on the version). Press and hold the reset button for about 3/5 seconds, and release it when you see the TPMS light flashing. To complete the recalibration, drive for about 10/20 minutes at a speed over 80 km/h. If our car was produced after 2023, from the Sync touchscreen, go to "vehicle"/"tire pressure monitoring" and follow the on-screen instructions to perform the digital reset.

Posted on 23 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the procedure that will allow us to reset the tire pressure warning light of the Ford Focus; before performing the reset, it i…
How to reset the TPMS light on the Ford Focus
How to reset the TPMS light on the Ford Focus
Ford Focus (2011-2018 / MK 3) When the TPMS light related to tire pressure comes on in the Ford Focus, it means that we need to adjust the tire pressure and then reset the light. …
How to reset the tire pressure sensor of a Ford Focus?
How to reset the tire pressure sensor of a Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tire pressure light on a Ford Focus, turn on the instrument panel without starting the engine. Using the buttons on the steering wheel, …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos