Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tyre pressure sensor on the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

The tyre pressure sensor on the Ford Focus is located inside the tyre itself: to remove it, you will need to take off the bolts securing each wheel to its hub, dismounting them one at a time. You will need to use the appropriate machinery to remove the tyre and inner tube to access the inside of the rim. Here you will find the pressure sensor, which must be freed by unscrewing the appropriate fixing screws; after removal, you can insert the new one, mounting the corresponding wheel.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Ford Focus?
How to Reset the Tyre Pressure Warning Light on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To reset the tyre pressure warning light on a Ford Focus, first ensure all tyres are inflated to the recommended pressure: this value is indicated on…
How to Reset the Tyre Pressure Warning Light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Follow this guide for instructions to reset the tyre pressure warning light on the Ford Focus. First, get in the vehicle and turn on the instrument p…
How to Reset the Tyre Pressure Light on the Ford Focus?
How to Reset the Tyre Pressure Light on the Ford Focus?
Ford Focus (2018-2025 / MK 4) In this tutorial, you will see how to reset the tyre pressure light on the Ford Focus, a very simple and quick operation that should be done only aft…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos