Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch Panel on Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Power window switch

How do you remove the window switch panel located in the door panel of a Ford Fiesta? Follow these steps: Disconnect the battery terminals located in the front engine bay. Use a lever or screwdriver to pry at the bottom of the handle on the door panel, then detach the piece (as shown in the video). Use a plastic lever to unclip all the clips around the perimeter of the door. Finally, pull out the switch panel using a lever. Refit the new piece and reassemble the door by following the previous steps.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Window Switch Panel on a Ford Fiesta
How to Remove the Window Switch Panel on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove the window switch panel located in the driver’s door on a Ford Fiesta? This video explains how to proceed. Before starting the disassem…
How to replace the driver's side switch panel of the Ford Fiesta
How to replace the driver's side switch panel of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The repair of the driver side window switch panel of the Ford Fiesta is very simple. All you have to do is open the door, in the case of the video ex…
How to Replace the Door Panel of the Ford Fiesta?
How to Replace the Door Panel of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To remove the door panel of the Ford Fiesta, detach the trim located just below the window switch. Once the window switch has been completely removed…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos