Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Window Regulator of a Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove the window regulator in a fifth-generation Ford Fiesta. First, open the door and unscrew all the screws on the panel; then also remove the plastics, using a lever, and disconnect the window switch by unplugging its electrical connector.

At this point, unscrew the screws of the grab handle and remove the door panel by pulling and prying at multiple points along the sides; disconnect the handle cable. Now unscrew the screws of the inner panel and remove it to access the window regulator and detach it!


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Window Switch on the Ford Fiesta
How to Remove and Replace the Window Switch on the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Removing and replacing the window switch takes just a few minutes; here’s how to do it on the Ford Fiesta. First, open the front door of your car and…
How to Reset the Window Regulator Motor of the Ford Fiesta
How to Reset the Window Regulator Motor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow these instructions to reset the window regulator motor of the Ford Fiesta in simple steps. First, get inside the vehicle and turn on the ignit…
How to Replace the Window Regulator Mechanism on the Ford Fiesta
How to Replace the Window Regulator Mechanism on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Follow these step-by-step instructions to remove and replace the window regulator mechanism on the Ford Fiesta. First, open the front door and remove…

    Frequently Asked Questions

    • Fiesta 1996-2002 - How to replace the ignition lock on a Ford Fiesta? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos