Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Indicator on Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Learn how to reset the maintenance indicator on Ford Focus (oil change). This is a very simple operation: enter the vehicle, press the accelerator and brake pedals simultaneously (keep them pressed); turn on the instrument panel using the dedicated button (you will see the maintenance light illuminated).

After these steps, turn the ignition off and then back on to ensure the maintenance performed is applied (the light will no longer stay illuminated). Always remember to make changes to the onboard computer with the ignition off. Perform a general check of the settings made.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Indicator on a Ford Focus
How to Reset the Service Indicator on a Ford Focus
Ford Focus (2011-2018 / MK 3) Learn how to reset the service maintenance indicator on a Ford Focus. This is a very simple operation: enter the vehicle, switch on the ignition (you…
How to Reset the Service Indicator on a Ford Focus
How to Reset the Service Indicator on a Ford Focus
Ford Focus (2011-2018 / MK 3) To reset the service indicator on a Ford Focus, follow these steps: First, turn on the ignition without starting the engine. Press the accelerator an…
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
Ford Focus (2004-2011 / MK 2, Focus 2) How to replace the side indicator located in the external mirror of a Ford Focus? Proceed as follows: using a lever with a plastic or rubber coating,…

    Frequently Asked Questions

    • Focus 2004-2011 - What does the airbag warning light on Ford Focus indicate? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos