Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part:

In this tutorial, we will see how to reset the tire warning light on the Ford Focus, a very simple and quick operation that should be done only after restoring the correct pressure in each tire, following the instructions in the manual. First, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, we access the general menu using the directional controls on the steering wheel, go to "Settings," "Driver assist," "Tyre monitor," and perform the reset by holding down the "OK" button. To complete the procedure, simply restart the vehicle.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Ford Focus?
How to Reset the Tyre Pressure Light on a Ford Focus?
Ford Focus (2018-2025 / MK 4) You can completely clear the tyre pressure light on a Ford Focus by inflating the tyres until they reach the optimal pressure value: this will be ind…
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …
How to reset the tire pressure sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the procedure that will allow us to reset the tire pressure warning light of the Ford Focus; before performing the reset, it i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos