Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear shift knob on a manual Ford F-150.

Model: Ford F-150 MK 9 - Years 1992-1997
Part: Transmission

Let's see in this video how to replace the gear knob on a manual Ford F-150: to make the replacement, it will be necessary to put the lever in the fourth gear position, so that the lever is facing downwards, which will give us a better angle to do the job. In fact, it will be necessary to lean against the floor of the vehicle and pull with all the strength possible, pulling the knob off the rod. Then, to install the new knob, it will be convenient to put the lever in the first gear position. We can find it on eBay with the code 285808757164 for the price of 23.75 euros, with free shipping. Let's put it in place according to the gear indications and give it a couple of taps: let's put it back in fourth gear, try to pull it up, and if it's secure, give it another tap. All set.

Posted on 28 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Shift Knob on a Ford F-150?
How to Replace the Shift Knob on a Ford F-150?
Ford F-150 (2004-2008 / MK 11) To replace the shift knob on a Ford F-150, use a screwdriver to pry off the chrome cover at the back of the knob. Once the cover is removed, unscrew …
Where is the fuse box of the Ford F 150 2022 located?
Ford F-150 (2021-2026 / MK 14) .. and then locate all the fuses of your Ford F 150... …
Where to Find the Fuse Box of the 2022 Ford F-150
Where to Find the Fuse Box of the 2022 Ford F-150
Ford F-150 (2021-2026 / MK 14) In this guide for all of you with a 2022 Ford F-150, you will learn the steps necessary to easily locate the vehicle's fuse box. First, go inside the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos