Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to unscrew the lock nut of the front headlight of the Ford Focus.

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Checks and maintenance

Today we will explain an alternative method for unscrewing the lock nut of the front headlight of the Ford Focus MK2 model. To perform the operation, we need to use a €2 coin. Open the front hood and unscrew the nut using the €2 coin by positioning it vertically and turning the nut counterclockwise. After removing the nut, it will be possible to detach the headlight from its housing, taking care not to damage the connector during removal. The same coin can be used to screw the lock nut back on. This is an alternative method that allows us to replace the front headlight bulb or the headlight itself in the absence of a T25 wrench.

Posted on 7 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb on the Ford Focus?
How to replace the front headlight bulb on the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the front headlight bulb on the Ford Focus, open the bonnet and loosen the socket screw that secures the headlight to its upper support. T…
How to Replace the Front Headlight Bulbs on a Ford Focus
How to Replace the Front Headlight Bulbs on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to replace the front headlight bulbs on a Ford Focus and don’t know how? Let’s see how to proceed in the video guide. Open the bonnet by pulling…
Replacing Front Headlamp Bulbs on Ford Focus
Replacing Front Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlamp bulbs on your Ford Focus blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the da…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos