Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the remote control for the Ford Kuga, Galaxy, and Mondeo.

Model: Ford Kuga MK 3 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

Let's see how to replace the battery in the remote control of a Ford Kuga, Galaxy, or Mondeo. Although the replacement method is the same for all, the type of battery may not be the same: in fact, for most of these vehicles, it is a CR2032 button battery, while in some Mondeo models produced between 2015 and 2019, it may be a CR2025. Hold the remote with the Ford logo facing you, insert a small flat screwdriver into the side slot, and gently pry it open, separating the two halves of the shell.

You will see the circuit and the battery, held in place by a metal tab; gently lift it and remove the battery. Replace it with the new one, paying attention to the polarity.

Close the casing and test its functionality.


Posted on 11 January 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Ford Kuga
How to Replace the Key Battery of a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Replacing the battery in the remote control of a Ford Kuga is a very simple operation; you will only need the correct model of battery to replace, wh…
How to Replace the Remote Control Battery of the Ford Kuga?
How to Replace the Remote Control Battery of the Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the battery of the Ford Kuga remote control, detach the cover on the back of the device, then also remove the key blade underneath: once t…
How to replace the remote control battery of the Ford Kuga?
How to replace the remote control battery of the Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) Replacing the remote control battery of the Ford Kuga, as shown in this tutorial, is an extremely simple and quick operation. You will need a replace…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos