Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery of the Ford Ranger

Model: Ford Ranger MK 3 - Years 1998-2011
Part: Key

In this article, you will see how to replace the battery of the Ford Ranger key. For this operation, you will need a CR2032 battery and a small flathead screwdriver. To replace the battery, insert the screwdriver along the central edge of the key, then lever it open. Once the key is open, remove the old battery, replace it, and close the key by pressing down with your hands to secure the clips. As you can see, this operation takes little time to complete.

Posted on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Ford Ranger key
How to replace the battery of the Ford Ranger key
Ford Ranger (2022-2026 / RA, P703) If you do not know how to properly replace the battery in the key of your latest model Ford Ranger, do not worry because in the following guide you w…
How to replace the battery of the key fob remote for the Ford Ranger
How to replace the battery of the key fob remote for the Ford Ranger
Ford Ranger (1998-2011 / MK 3) Today we will discover the useful information for disassembling and replacing the battery of the key remote for the Ford Ranger. First, we take our r…
How do you replace the battery in the Ford Ranger remote control?
How do you replace the battery in the Ford Ranger remote control?
Ford Ranger (2011-2023 / T6, PX, P375) To replace the battery of the Ford Ranger remote control, you need to press the button located on the top of the device, so that the key can be remov…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos