Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disabling the Horn When Closing the Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Checks and maintenance

The method proposed here and shown in the video is generic; it is not specifically aimed at the Ford Transit but applies to any vehicle on the road. What does the protagonist of the video do? He connects to the vehicle's control unit via the OBD port with a PC that has the specific software, then configures all the parameters and subsequently scrolls through the entire available menu to select the code corresponding to the horn sound function when closing the vehicle. In short, each operation corresponds to a code, and it is this last one that needs to be replaced with zero to stop it from functioning.

Posted on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the horn of the Ford Transit van located?
Where is the horn of the Ford Transit van located?
Ford Transit (2014-2024 / MK 8) In this video we can see where the horn of the horn is located in the Ford Transit van and how to proceed in case we need to replace it, an extremely…
How to Open the Bonnet of a Ford Transit
How to Open the Bonnet of a Ford Transit
Ford Transit (2006-2014 / MK 7) On most cars, the front bonnet opens by pulling the lever inside the vehicle; on our Ford Transit, the bonnet opens with the ignition key. Here’s how…
Where are the fuses located in the Ford Transit?
Where are the fuses located in the Ford Transit?
Ford Transit (2014-2024 / MK 8) The fuses in the Ford Transit are divided among three fuse boxes installed within the vehicle: there are two boxes inside the cabin and one in the en…

    Frequently Asked Questions

    • Transit 2014-2024 - How do you access the secret menu of the Ford Transit Custom? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos