Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Handbrake of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Parking brake

See other generations:
Video tutorial

Today, I will explain how to repair the handbrake of the Ford Fiesta MK 7 model. First, remove the upper plastics of the centre console between the seats.

To unclip it, you need to first remove the cigarette lighter and disconnect the connector, then use a flathead screwdriver to unclip the internal clips by inserting it sideways. The failure of the handbrake is due to the breakage of the flexible cable inside.

To repair it, position the threaded metal rod of the locking pin inside the spring and button to re-tension the handbrake. After inserting the threading, tighten the nut to adjust the firmness of the handbrake.

This operation should be repeated several times before reassembling the console. When the handbrake reaches the desired firmness for safety tension, you can reassemble the console.


Posted on 26 February 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Ford Fiesta Mk7
How to Adjust the Handbrake on a Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Start by removing the gear lever from its housing. To do this, unscrew the knob and then remove the plastic cover. Next, remove the lower dashboard t…
How do you adjust the handbrake of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In order to adjust the handbrake of the Ford Fiesta, you need to completely remove the cover of the center tunnel. Once the cover is removed, you wil…
How to Adjust the Handbrake on a Ford Fiesta
How to Adjust the Handbrake on a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Learn how to adjust the handbrake on a Ford Fiesta. Use a screwdriver to remove the cover located under the handbrake lever; unscrew the plastic armr…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos