Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Ford Connect

Model: Ford Connect MK 2 - Years 2013-2023
Part: Service warning light

To reset the maintenance light on a Ford Transit Connect, turn the ignition switch to the ON position without starting the engine. Press the brake and accelerator pedals down simultaneously and hold them for about 20 seconds. A message will appear on the instrument cluster display indicating the start of the reset procedure. Continue to hold both pedals until the system confirms the operation is complete. At that point, release the pedals, turn off the ignition, and wait a few moments. Finally, turn the instrument cluster back on to check that the service warning is no longer displayed and that the maintenance counter has been updated.

Posted on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Connect
How to reset the service light on the Ford Connect
Ford Connect (2013-2023 / MK 2) When the service light comes on in the Ford Connect, it means that it is necessary to perform a car service and immediately after reset the light. On…
How to Reset the Oil Change Light on the Ford Connect
How to Reset the Oil Change Light on the Ford Connect
Ford Connect (2013-2023 / MK 2) In this article, you will see the procedure to reset the oil change light, or service light, on the Ford Connect. To reset the light, start the instr…
How to reset the service light on the 2020 Ford Connect
How to reset the service light on the 2020 Ford Connect
Ford Connect (2013-2023 / MK 2) The steps to reset the service indicator light on a 2020 Ford Connect vehicle are very simple and quick. The first step is to turn on the instrument …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos