Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on a 2007 Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: License plate light

To replace the number plate light bulb on a Ford Focus, first, place the car on a ramp or secure it on level ground. Open the boot and access the small light units that house the bulbs for the number plate illumination. Use a flathead screwdriver to lever the right side of the light unit and remove it from its housing. Once this is done, you will have access to the bulb you want to replace. For safety, you can disconnect the electrical supply. Once the new bulb is fitted, reposition the small light unit in its place by simply pushing it with your fingers. And that's it!

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulb on a Ford Focus?
How to Replace the Number Plate Bulb on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the number plate bulb on a Ford Focus, loosen the two screws located on the light fixture so that it can be removed. Inside, you will find…
How to Replace the Number Plate Bulb on the Ford Focus
How to Replace the Number Plate Bulb on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this short and simple guide, you will find instructions to remove and replace the number plate bulbs on the Ford Focus, following the instructions…
How to Remove the Rear Number Plate Lights on a Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the bulbs from the rear number plate of a Ford Focus? Here’s how to replace the damaged bulbs. Pry at the sides of the number plate…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos