Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Ford F-150

Model: Ford F-150 MK 12 - Years 2009-2014
Part:

To reset the TPMS (Tire Pressure Monitoring System) light on a Ford F-150, turn on the instrument cluster without starting the engine. Ensure all tires are inflated to the correct pressure; on the dashboard, locate the TPMS button, usually found near the steering wheel or on the center panel. Press and hold the button until the TPMS light blinks for a few seconds and then turns off. Finally, turn off the instrument cluster and turn it back on to check the outcome of the procedure; the TPMS light should be off, indicating that the system has recognized the correct tire pressures.

Posted on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Ford F-150
How to Reset the TPMS Light on a Ford F-150
Ford F-150 (2015-2020 / MK 13) If the TPMS sensor on your new Ford F-150 shows errors related to tire pressure, don't worry; you just need to perform a simple reset to resolve the …
How to reset the TPMS light on a Ford
How to reset the TPMS light on a Ford
Ford F-150 (2009-2014 / MK 12) Today we will explain how to reset the TPMS light, related to tire pressure, on a Ford F150 vehicle in a simple, quick, and autonomous way. We start …
How to Replace the Tire Pressure Sensor on a Ford F-150
How to Replace the Tire Pressure Sensor on a Ford F-150
Ford F-150 (2015-2020 / MK 13) Below are the instructions to remove and replace the tire pressure sensor, allowing you to reset the TPMS light on your Ford F-150. First, lift the v…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos