Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on the 2017 Ford Ranger?

Model: Ford Ranger T6, P375, PX - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: AdBlue warning light

See other generations:
Video tutorial

The AdBlue warning light usually turns off by itself after refuelling this additive and driving for a few miles. If this does not happen, follow the procedure shown in the video to try to reset it. Here’s what to do: 1) ensure that the AdBlue tank is sufficiently full; 2) turn on the ignition without starting the engine; 3) wait for about 30 seconds; 4) turn off the vehicle and then restart it, also starting the engine and waiting for about 5 minutes.

If this still does not work, there may be a fault with the sensors or injectors.


Posted on 1 September 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on the Ford Ranger?
How to Reset the AdBlue Warning Light on the Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) To reset the AdBlue warning light on the Ford Ranger, you need to top up by adding the necessary amount of additive liquid into the relevant tank: th…
How to reset the AdBlue warning light on a Ford Ranger?
How to reset the AdBlue warning light on a Ford Ranger?
Ford Ranger (2011-2023 / T6, P375, PX) To reset the AdBlue warning light on a Ford Ranger, you need to top up the tank by adding the necessary amount of additive liquid: this can be found …
How to Reset the AdBlue Warning Light on a Ford Ranger After Refuelling
How to Reset the AdBlue Warning Light on a Ford Ranger After Refuelling
Ford Ranger (2011-2023 / T6, P375, PX) In this video, we will see how to reset the AdBlue warning light on a Ford Ranger after correctly refuelling with AdBlue. The light did not reset its…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos