Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform Maintenance on Your Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Battery

How to perform maintenance on your Ford Kuga? This video explains how to replace the battery. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, disengaging the locking lever with your fingers, then secure it. Once the engine compartment is open, you will find the battery at the top; remove the securing nuts from the battery terminals, then take it out of the engine compartment and replace it with a new one (same voltage). Close the engine bonnet after installing the battery.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of a Ford Kuga
How to Replace the Battery of a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) How to maintain your Ford Kuga? This video explains how to replace the battery located in the engine compartment. Open the car door and pull up the e…
How to Perform the Service Reset on a Ford Kuga III DFK
Ford Kuga (2020-2026 / MK 3) This video tutorial shows how to perform the service reset on a Ford Kuga III DFK by following a few simple steps that allow you to work independentl…
Where Are the Fuses on a Ford Kuga?
Where Are the Fuses on a Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) The fuses on the Ford Kuga are located inside the dedicated fuse boxes within the car. This model has two: the first is inside the cabin and the seco…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos