Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Grilles on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Grille

To replace the grilles located on the front of the Ford Focus, place the car on a ramp or secure it on a flat surface. Remove the two small covers located under the side peaks of the larger grille using a small plastic pry tool. Once done, pry at the left corner of the larger grille with the same tool and proceed around its perimeter to release it from its housing. After removing the grille, proceed to remove the chrome frame which is secured by clips. Now, remove the lower grille. The process is the same, plus releasing 8 clips located on the sides and the bottom of the grille. Once these operations are complete, you can proceed to install the new grille by reversing the previous steps.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, you will learn how to remove the front bumper from a second-generation Ford Focus. First, detach the front fog light grilles using a lever. Ne…
How to install the front fog lights of the Ford Focus
How to install the front fog lights of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) These short and simple instructions will show us how to install the front fog lights of the Ford Focus. First of all, let's move to the front and sta…
How to Remove the Front Headlamp of a Ford Focus
How to Remove the Front Headlamp of a Ford Focus
Ford Focus (2011-2018 / MK 3) Before starting, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws that secure the front headlamp to the car's frame. N…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos