Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Diesel fuel filter

Replace the diesel filter on a Ford Fiesta. Use a socket spanner to unscrew the screws that secure the cap (you can also use a socket spanner), located on top. Disconnect the pipes and wiring. Once the filter is removed, take it out of the vehicle (replace it with a new filter). Finally, fit the filter into the attached housing of the diesel filter (connect the previously removed pipes and wiring) and tighten the securing screws with the socket spanner. Close the front bonnet after installation. Start the vehicle and test it.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter of the Ford Fiesta 1.4 TDCi
How to replace the fuel filter of the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The following steps will show us the process of disassembling and replacing the diesel filter of the Ford Fiesta 1.4 TDCi. First, we lift the vehicle…
How to Replace the Fuel Filter on a Ford Fiesta?
How to Replace the Fuel Filter on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, we will see how to replace the fuel filter on a Ford Fiesta. Use a lift to raise your car; open the fuel tank cap. Now that t…
How to Replace the Fuel Filter of the Ford Fiesta Mk5 1.4 CDTi
How to Replace the Fuel Filter of the Ford Fiesta Mk5 1.4 CDTi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide shows how to replace the diesel filter of the Ford Fiesta Mk5 1.4 TDCi. The first step is to open the bonnet and remove the air filter cov…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos