Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Grille

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Grille

The grille at the front of the bumper is simply clipped along the edges: to remove it, insert your fingers inside the edge of the grille and pull while applying pressure with your thumbs along the edge of the bumper. Take care not to damage the retaining clips and alignment tabs. To refit it, align the alignment tabs correctly with the appropriate slots and press to reattach the clips: if a tab does not fit perfectly into the corresponding slot, you will notice that the edge of the grille is slightly raised.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Grille of a Ford Fiesta
How to Remove the Front Grille of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How do you remove the front grille of a Ford Fiesta? This video shows you how to detach the trim on the front bumper. Using a plastic lever, pry betw…
How to Remove the Front Grille of the Ford Fiesta
How to Remove the Front Grille of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To remove the integrated front grille from the bumper, you will actually need to detach the bumper itself to release the clips, which are the tabs al…
How to Remove the Front Grille of a Ford Fiesta
How to Remove the Front Grille of a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Remove the front bumper grille on a Ford Fiesta. Prepare to detach the two plastic grilles on either side of the bumper (fog light side trims). Using…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos