Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Grille of a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Grille

Remove the front bumper grille on a Ford Fiesta. Prepare to detach the two plastic grilles on either side of the bumper (fog light side trims). Using a suitable plastic lever, pry between the frame and the bumper until the grille plastics release. Once the upper grille is removed, take out the lower grille from the bumper. Refit the grilles into the car's bumper; press until they lock into place (fit both grilles along with the fog light side trims). Check the correct installation of the parts.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front bumper grille of the Ford Fiesta
How to replace the front bumper grille of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this guide we will see the procedure that will allow us to disassemble and replace the front bumper grille of the Ford Fiesta, following these sim…
Removing the Front Bumper Grille on Ford Fiesta
Removing the Front Bumper Grille on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here's how to remove the grille from the front bumper of a Ford Fiesta: using a plastic lever or screwdriver, pry between the bumper plastic and the …
How to Remove the Air Vent on a Ford Fiesta
How to Remove the Air Vent on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Learn how to remove the air vents on a Ford Fiesta (right side). To proceed with the removal: use plastic levers to remove the trim around the air ve…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos