Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper Grille on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Grille

Below are the step-by-step instructions for removing and replacing the front bumper grille on the Ford Fiesta. First, move to the front of your car and start unfastening the grille by hand, working at multiple points; begin at the sides and then unclip it from the centre, as illustrated in the video. At this point, clean the sides of the grille, securely attaching the new one using the small clips; ensure that the supports are in good condition and fix the grille at the sides, following the video tutorial until the end!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front bumper grille of the Ford Fiesta
How to replace the front bumper grille of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this guide we will see the procedure that will allow us to disassemble and replace the front bumper grille of the Ford Fiesta, following these sim…
Removing the Front Bumper Grille on Ford Fiesta
Removing the Front Bumper Grille on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Here's how to remove the grille from the front bumper of a Ford Fiesta: using a plastic lever or screwdriver, pry between the bumper plastic and the …
How to Remove the Front Grille of a Ford Fiesta
How to Remove the Front Grille of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How do you remove the front grille of a Ford Fiesta? This video shows you how to detach the trim on the front bumper. Using a plastic lever, pry betw…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos