Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Bulbs on a Ford B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Tail light bulb

The rear light on this vehicle is divided into two parts, one on the side body and the other on the tailgate. In this video, you will see how to access the bulbs in both sections. To remove the side part, simply open the access flap in the trim located just behind the light, where you can unlock the entire lighting unit using a lever and disconnect the electrical connector. To access the corresponding part on the tailgate, remove the internal panel held by perimeter clips and two screws located under the handle cover.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Ford B-Max
How to replace the rear headlight bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Ford B-Max. First of all, we …
How to Replace the Interior Bulbs of the Ford B-Max
How to Replace the Interior Bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) In today's video, you will see how to replace the interior lights of the Ford B-Max. Obtain a flathead screwdriver and proceed to unclip the ceiling …
Replacing Rear Headlight Bulbs on Ford B Max
Replacing Rear Headlight Bulbs on Ford B Max
Ford B Max (2012-2018 / MK 1) Open the boot and observe the side area inside it, locating a small flap present in the lining behind the headlights. Open the flap for the affected …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos