Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Cabin Air Filter on Ford Ranger

Model: Ford Ford Various
Part: Cabin air filter

Replace the cabin air filter on a Ford Ranger? Let's see how to remove it from inside the glove compartment. Open the glove compartment and unclip the plastics from inside the dashboard. Locate the air filter cover. Detach the plastic cover from it. Pull the air filter out of its housing as shown in the video. Insert the new filter and close the compartment with the plastic cover, refit the glove compartment into the dashboard as it was removed earlier (clip the sliding plastics back into the dashboard). Replace the old cabin air filter with one of the same size.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine air filter of the 2025 Ford Maverick.
How to replace the engine air filter of the 2025 Ford Maverick.
Ford Ford Various Replacing the engine air filter in your new 2025 Ford Maverick is really simple. All you need to do is carefully read the steps described below and f…
How to replace the air filter in the Ford Everest?
How to replace the air filter in the Ford Everest?
Ford Ford Various The air filter is located in the engine compartment and is accessible by lifting the front bonnet. To change this filter, no other components need to…
How to Replace the Cabin Filter on a Ford Maverick
How to Replace the Cabin Filter on a Ford Maverick
Ford Ford Various The cabin air filter inside your Ford Maverick is undoubtedly one of the easiest components to replace independently. Additionally, you can complete …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos