Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Folding the Rear Seat on Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Seat

How to fold the rear seat of a Ford Kuga? Open the rear door and see how to do it. Press the button located on the headrest above the seat back. Fold the seat back forward: let it rest on the seat base (lift the plastic lever near the base). Perform the same operations on the other rear seats (unless the seat is whole and not split) following the previously mentioned manoeuvres. If you want to fold the front seat for extra space: press the lever next to the seat and lower it until it rests on the seat base. Raise the front seat after use and adjust the headrest.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to recline the rear seat backs of the Ford Kuga
How to recline the rear seat backs of the Ford Kuga
Ford Kuga (2020-2026 / MK 3) In this short and simple guide, we will see how to recline the rear seatbacks of the Ford Kuga, following the instructions below. First, we open the …
How to Replace the Folding Mirror Motor on a Ford Vehicle
How to Replace the Folding Mirror Motor on a Ford Vehicle
Ford Kuga (2020-2026 / MK 3) Replacing the folding mirror motor on Ford (Focus, Kuga, Fiesta) is straightforward if you only replace the motor and not the entire assembly. The ge…
How to Remove the Front Seat of the Ford Kuga
How to Remove the Front Seat of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Watch this video to learn how to remove the driver's seat from the Ford Kuga: identify four locations that hide the bolts you need to undo to take ou…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos