Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
This video is currently unavailable

Before starting, open the tailgate of the boot on your Ford Kuga. Begin by prising off and removing the screw cover using a small flathead screwdriver. Next, dislodge and pull out the rear light from its housing.

This will expose the internal connector that powers the bulbs. Proceed to disconnect this connector, and you will have completed the disassembly.

To fit the new rear light, simply follow these instructions in reverse, and you will have completed the replacement.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to replace the brake light bulb on a Ford Kuga
How to replace the brake light bulb on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) The instructions in this guide will allow us to disassemble and replace the rear headlight bulb of the Ford Kuga, in simple steps. First, we open the…
How to Replace the Rear Light Bulb on a Ford Kuga?
How to Replace the Rear Light Bulb on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the rear light bulb on a Ford Kuga, open the tailgate to access the screws that secure the corresponding light on its side. Once these bol…
Replacing the Rear Headlamp Bulb on a Ford Kuga
Replacing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In this video tutorial, you will learn how to remove and replace the rear headlamp bulbs on a second-generation Ford Kuga by following these simple s…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos