Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Tail light bulb

In today’s video tutorial, you will learn how to change the rear headlamp bulb on a Ford Kuga. First, open the boot and grab a screwdriver: then unscrew the two support screws of the headlamp found on the side; at this point, pull out the headlamp using a plastic lever and pulling it forward, then disconnect the electrical connector at the back. Now you can access all the bulbs and replace them: for reassembly, simply reverse the procedure, reconnecting the connector and securing the headlamp.

Updated on 29 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
How to Replace the Bulbs of the Rear Light on a Ford Kuga
How to Replace the Bulbs of the Rear Light on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Do you want to change the bulbs of the rear light on a Ford Kuga but don't know how to proceed? No problem, let's see how to do it: open the rear hat…
Replacing the Rear Headlamp Bulb on a Ford Kuga
Replacing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, you will learn how to remove and replace the rear headlamp bulbs on a second-generation Ford Kuga by following these simple s…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos