Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Wiper Blade from a C Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

Replace the damaged wiper blades on a Ford C Max. Take the front wiper blade (to be replaced) with your hands, pull the movable blade as shown in the video, and slide it off the arm on the rear window. Fit the new blade onto the arm (if the blade is not original, detach the piece as shown in the video), and you will hear a click indicating it is secured.

Finally, lower the wiper arm onto the rear window. Operate the front and rear wipers using the control levers.

Replace all damaged wiper blades on the vehicle.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Ford C-Max
Removing the Front Door Panel of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Follow these instructions to remove and replace the front door panel of the Ford C-Max. First, open the front door and start by removing the switch p…
Replacing Wiper Blades on a Ford C-Max
Replacing Wiper Blades on a Ford C-Max
Ford C Max (2010-2019 / MK 2) To replace the wiper blades, first position the wipers in service mode to lift the arms without scratching the bonnet: turn on the ignition and comma…
Replacing the Lock Cylinder of the Front Door Handle on the Ford C-Max
Replacing the Lock Cylinder of the Front Door Handle on the Ford C-Max
Ford C Max (2010-2019 / MK 2) Today, in this video tutorial, learn how to remove and replace the lock cylinder of the front door handle on the Ford C-Max. First, open the front do…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos