Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Lock Cylinder of the Front Door Handle on the Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Door lock

Today, in this video tutorial, learn how to remove and replace the lock cylinder of the front door handle on the Ford C-Max. First, open the front door and start by removing the small plastic cap found on the side; then unscrew the screw located inside using a Torx screwdriver, as shown in the video. At this point, gently remove the lock cylinder from the outside; then separate the cylinder from the plastic cover and replace it with the new one, applying the reverse procedure!

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Ford C-Max
Disassembly of the front door panel of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Today we will discover the necessary instructions that will allow us to disassemble and replace the front door panel of the Ford C-Max. First, we ope…
How to Remove the Rear Door Panel of the Ford C-Max
How to Remove the Rear Door Panel of the Ford C-Max
Ford C Max (2010-2019 / MK 2) In this guide, you will find the main instructions for removing the rear door panel of the Ford C-Max. First, open the rear door and start unscrewing…
Replacement of the front hood lock of the Ford CMax MK2
Replacement of the front hood lock of the Ford CMax MK2
Ford C Max (2010-2019 / MK 2) Let's see how to proceed to replace the key lock of the front hood of the Ford C-Max. With the hood open, remove the grille above the radiator by uns…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos