Do it yourself
| ||||
|
Ford Focus - Video tutorial
Model: Ford Focus
MK 2, Focus 2
- Years 2004-2011 In this video tutorial we will see how to replace the thermostatic valve of a Ford Focus second series, following these instructions. First we go to open the bonnet and we go to disconnect the two battery terminals; then we lift the car and remove the plastic protective bulkhead that we find under the engine, unscrewing the screws. At this point, let all the coolant drain out, and then put the plastic protection back on; now we remove the intake sleeve, disconnecting the mass air sensor, and detach the air filter box. We just have to disconnect the coolant pipes and unscrew the fixing screws of the thermostat, as in the video!
Posted on 31 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you replace the battery of the BMW R 1250 GS?In order to replace the battery of the BMW R 1250 GS it is necessary to loosen the bolts that secure the casing positioned on the left side of the bike, so that its cover can be removed. Once this has been removed, you will be able to access the components below, including the battery. The latter must be removed from its housing by disconnecting the power cables and unscrewing the appropriate fixing bolts. In this way it will be possible to insert a new battery, properly fixing it and connecting it to the relative cables, covering everything with the casing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |