Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Replacing the pollen air filter on your Ford Focus 3

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Air filter
Operation: Replacing the pollen air filter on your Ford Focus 3

As it would always be recommended, we must arrange our car (in this case the Ford Focus) so that it is well immobilized in a stable and safe position. This precaution is used to ensure a minimum of safety for the operator who goes to carry out any maintenance operation. At this point, after locating the seat of the pollen air filter (which, in this case, is located on the passenger side in the partition wall with the driver seat, vertical, below the dashboard), we remove the decorative cover and we have, so ¬, access to the filter housing. We act on the 2 levers to open it and extract the old filter. Let's insert the new filter in its seat and reassemble everything following the above procedure but, of course, proceeding backwards. And that's it!


Posted on 29 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - Where is the Ford Focus III engine air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos