Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Light on a Ford Ka MK3

Model: Ford Ka MK 3 - Years 2016-2019
Part: Headlight

In this video, we will see the steps to remove the front light on a Ford KA third series. First, open and lift the bonnet of your car and unscrew the upper screws of the headlight using a T30 Torx screwdriver; then gently try to detach the wing from the side of the light and unscrew the upper and lower fastening screws of the bumper, as illustrated in the video. At this point, you can release the headlight and remove it by disconnecting the electrical connector of the bulbs; apply the reverse procedure for reassembly!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Ford Ka 3
How to replace the rear headlight bulb of the Ford Ka 3
Ford Ka (2016-2019 / MK 3) If one of the bulbs in the rear light of your Ford Ka Mk3 has suddenly stopped working and you are wondering how to replace it correctly, all you nee…
How to change the front headlight bulb of the Ford Ka MK3
How to change the front headlight bulb of the Ford Ka MK3
Ford Ka (2016-2019 / MK 3) In this video, we see how to change the headlight bulb of the Ford KA MK3: inside the hood, we have enough space to reach in with our hands and remov…
Resetting the Service Light on a Ford Ka
Resetting the Service Light on a Ford Ka
Ford Ka (2016-2019 / MK 3) After changing the engine oil in your vehicle, it is also necessary to reset the service light. In today's video, we will show you how to perform thi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos