Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cabin Air Filter

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: Cabin air filter

Frequently replacing the pollen filter helps prevent allergies as it purifies the air in the cabin. The filter is located under the passenger side glove compartment. To access it, unscrew the three bolts securing the cover. After removing the filter cover by unscrewing the two side screws, carefully pull the cartridge outwards to avoid dispersing dust. Obtain a pollen filter of the same model identical to the original. Clean the housing from any dirt. Reinsert the new cartridge into the container, ensuring it is positioned correctly, and close the cover with the bolts.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Ford Mondeo / Fusion (1993-2000 / MK 1) The cabin air filter is located externally to the cabin and is positioned on the driver's side, just below the windscreen. To replace it, you need to…
Replacing the Cabin Air Filter on Ford Tourneo Courier and Ford Mondeo
Replacing the Cabin Air Filter on Ford Tourneo Courier and Ford Mondeo
Ford Mondeo / Fusion (1993-2000 / MK 1) In this video, we will replace the cabin air filter located in the engine compartment on the passenger side. Once the front bonnet is safely opened a…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Ford Mondeo / Fusion (2007-2014 / MK 3) The cabin air filter is located just behind the centre tunnel, and to access it for replacement, you need to remove the glove compartment from the pa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos