Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Ford Fiesta 6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Engine oil

Before starting, open the bonnet of your Ford Fiesta. Begin by unscrewing and removing the oil filler cap. Next, lift the front end of your vehicle. Once done, remove the lower protective cover by unscrewing the relevant fixing screws. This will give you access to the lower drain nut. Proceed by unscrewing and removing this nut to allow the engine oil to drain out. Once the oil has drained, re-screw the lower nut, then lower the front end. At this point, add new oil through the top hole, then re-screw the relevant cap. Once completed, you will have finished the oil change.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Oil on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to replace the engine oil filter on a Ford Fiesta? Follow these steps for the replacement: lift the car on a column lift and unscrew the plug of …
How to Change the Engine Oil of a Ford Fiesta 5
How to Change the Engine Oil of a Ford Fiesta 5
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Before you can start, open the bonnet of your Ford Fiesta. Begin by unscrewing and removing the oil filler cap. Next, lift the front end of your vehi…
How to Replace the Engine Oil Pressure Sensor of the Ford Fiesta
How to Replace the Engine Oil Pressure Sensor of the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide outlines the steps to dismantle and replace the engine oil pressure sensor of the Ford Fiesta with a petrol engine. First, open the bonnet…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos