Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Replacing the exterior mirror on Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK 6, Fiesta 6, MK VI - Years 2008-2017
Part: Outside rearview mirror
Operation: Replacing the exterior mirror on Ford Fiesta

Do we want to remove the exterior mirror of a Ford Fiesta? Let's see how to remove the exterior mirror fixed above the door. Before removing the mirror, the panel covering the door must be removed. We unscrew the panel clamping screws after removing the handle cover. We detach the door panel with related parts, unscrew the mirror tightening screws with a socket wrench, remove the mirror power supply clamp (located inside the previously removed door. Remove the mirror with the power cables from the door We fix the new mirror with the locking pin.


Posted on 4 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to remove the rearview mirror of a Ford Fista VI? Read Answer
    • Fiesta 2008-2017 - How much does it cost to replace the exterior mirror on the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - How much does the Ford Fiesta VI exterior rear view mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos