Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door panel on Ford Fiesta MK6

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Door trim panel

In this video tutorial, you will see how to remove the front panel of the door on a sixth generation Ford Fiesta. First, open the front door and remove the protective cap of the opening handle; then unscrew the screw found underneath. At this point, use a plastic lever to unclip the panel found near the speaker, allowing you to unclip the window switch and disconnect the electrical connector; finally, remove the lower screw of the panel and pry at the sides to remove it, disconnecting the handle cable last.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on the Ford Fiesta MK6
Removing the Door Panel on the Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video tutorial, learn how to remove the front door panel on the Ford Fiesta MK6 by following these simple steps. First, open the front door a…
How to Remove the Rear Door Panel of a Ford Fiesta
How to Remove the Rear Door Panel of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the rear door of your Ford Fiesta. Begin by unclipping and removing the window winder by simply releasing the internal fix…
How to Remove the Rear Door Panel of a Ford Fiesta?
How to Remove the Rear Door Panel of a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, open the rear door of your Ford Fiesta. Begin by unclipping and removing the window winder by simply releasing the internal fixing c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos