Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In this short and simple video, we will see the steps to reset the service light for the routine maintenance oil change on a Ford Fiesta sixth series. First, get into the vehicle and turn on the ignition, ensuring all doors are closed; then press the brake and accelerator pedals, holding them down for fifteen seconds, as shown in the video.

At this point, release the two pedals and turn off the instrument cluster; now turn the engine back on and check that the maintenance light (the spanner) has been reset!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Ford Fiesta MK6
How to Reset the Service Light on a Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) .. In this video, we will see how to reset the service light on a Ford Fiesta MK6: first, ensure that all doors are closed; also close.. …
How to Reset the Service Light on a Ford Fiesta
How to Reset the Service Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The following video demonstrates how to reset the service light for a Ford Fiesta. As the first step, sit in the driver's seat and ensure all doors a…
How to Reset the Service Light on a Ford Fiesta 6
How to Reset the Service Light on a Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Resetting the service light is a very simple task to perform on your sixth-generation Ford Fiesta, and you can do it independently in just a few seco…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos