Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In this video, we will see how to reset the service light on a Ford Fiesta MK6: first, ensure that all doors are closed; also close the boot and the front bonnet of the vehicle. Once done, turn on the instrument panel without starting the engine, then press the accelerator and brake pedals down simultaneously, holding them for at least fifteen seconds.

During this time, the maintenance indicator will turn off. Release both pedals at the same time. The light should now be off. Do a further check by turning the vehicle off and back on.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Ford Fiesta MK6
How to Reset the Service Light on the Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) This guide shows how to reset the service light for the routine maintenance oil change on the sixth series Ford Fiesta. First, get in the vehicle and…
How to Reset the Service Light on a Ford Fiesta MK6
How to Reset the Service Light on a Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this short and simple video, we will see the steps to reset the service light for the routine maintenance oil change on a Ford Fiesta sixth series…
How to reset the engine oil change light on a Ford Fiesta?
How to reset the engine oil change light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) After performing an oil change on the Ford Fiesta mk6, you need to manually reset the service light and the message on the display. The procedure is …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos