Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Service warning light

This guide shows how to reset the service light for the routine maintenance oil change on the sixth series Ford Fiesta. First, get in the vehicle and turn the ignition on by turning the key to position one; then press and hold the brake and accelerator pedals simultaneously, as shown in the video. After about ten seconds, you will see the oil light flash; turn off the ignition and then start the engine to complete the reset, ensuring the light has been reset!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Fiesta MK6
How to Reset the Service Light on a Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, we will see how to reset the service light on a Ford Fiesta MK6: first, ensure that all doors are closed; also close the boot and the …
How to Reset the Service Light on a Ford Fiesta MK6
How to Reset the Service Light on a Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this short and simple video, we will see the steps to reset the service light for the routine maintenance oil change on a Ford Fiesta sixth series…
How to reset the engine oil change light on a Ford Fiesta?
How to reset the engine oil change light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) After performing an oil change on the Ford Fiesta mk6, you need to manually reset the service light and the message on the display. The procedure is …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos