Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Washer Fluid Reservoir and Pump on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Pump

In this video, you will see the instructions on how to remove the washer fluid reservoir and pump on a Ford Focus Mk3. First, lift the vehicle from the right side and remove the front wheel; then remove the wheel arch liner by unscrewing all the fastening screws. At this point, access the washer reservoir and pump: remove the fastening screws to detach it and disconnect the electrical connector of the pump and the various cables. Finally, replace it with a new one if damaged, and then reassemble everything!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Windscreen Washer Pump from a Ford Focus
Removing the Windscreen Washer Pump from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today, in this tutorial video, you will see how to remove the windscreen washer pump from a Ford Focus. Start by removing the front right wheel and l…
Replacing the Windscreen Washer Pump on a Ford Focus
Replacing the Windscreen Washer Pump on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Below are the steps that will allow you to disassemble and replace the windscreen washer pump on a Ford Focus. First, lift the vehicle to remove the …
Removing and Cleaning the Windscreen Washer Reservoir on Ford Focus 2
Removing and Cleaning the Windscreen Washer Reservoir on Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) In today's tutorial, you will learn how to remove and clean the windscreen washer reservoir on a second-generation Ford Focus. First, lift the vehicl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos