Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Ford Fiesta exterior mirror replacement 6

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK 6, Fiesta 6, MK VI - Years 2008-2017
Part: Outside rearview mirror
Operation: Ford Fiesta exterior mirror replacement 6

In this video tutorial we will see how to remove and replace the exterior rearview mirror of a sixth series Ford Fiesta. First we open the front door and we go to remove the plastic of the grip handle, using something thin; then unscrew all the fixing screws that we find below and the additional screws on the door panel. At this point we remove the side reflector and unscrew the bolt that is hidden; we take out the door panel and disconnect the electric connector of the mirror, then going to unscrew its fixing bolt to extract it!


Posted on 17 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to remove the rearview mirror of a Ford Fista VI? Read Answer
    • Fiesta 2008-2017 - How much does it cost to replace the exterior mirror on the Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - How much does the Ford Fiesta VI exterior rear view mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos