Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Wiper Motor on the Ford Kuga MK2

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Power window motor

See other generations:
Video tutorial

In this video, follow the steps to remove and replace the windscreen wiper motor on the second series Ford Kuga. First, open the bonnet of your car and start by removing the wipers, unscrewing the fixing screws at the base. Next, unscrew the additional screws from the plastic engine cover to remove it, as shown in the video.

At this point, unscrew the fixing screws of the wiper motor located on the left side of the engine bay; disconnect the electrical connector and replace it with the new one!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Ford Kuga
How to Replace the Wiper Blades on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) In this video, see how to replace the wiper blades on a Ford Kuga. The procedure is simple and takes little time to complete. To replace the wiper bl…
Replacing the Battery in a Ford Kuga and Ford Escape
Replacing the Battery in a Ford Kuga and Ford Escape
Ford Kuga (2012-2019 / MK 2, C520) In this video tutorial, you will learn how to replace the battery in a Ford Kuga and also in its twin, the Escape. First, open the bonnet and remove …
Where Are the Fuses Located on a Ford Kuga?
Where Are the Fuses Located on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) Any fuse on a Ford Kuga is located inside one of the designated fuse boxes present on the vehicle: there are three to be found in this type of vehicl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos