Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the throttle body on the Ford Focus 1.6 Zetec

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Throttle body
Operation: How to remove the throttle body on the Ford Focus 1.6 Zetec

In this video tutorial we will see how to remove and replace the throttle body on the Ford Focus 1.6 Zetec, first generation. First we open the bonnet of our car and we go to remove the air intake sleeve, unscrewing and loosening the clamp screw; after which we remove the electrical connector of the throttle position sensor and unscrew the fixing screws to remove the throttle body, as shown in the video. At this point, let's replace it with the new one, of the right type and with the original spare part; apply the reverse procedure for reassembly!


Posted on 25 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos