Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : How to remove the door panel on the Ford Focus MK2 - C-Max

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Door panel
Operation: How to remove the door panel on the Ford Focus MK2 - C-Max

In today's video tutorial we will see the steps on how to remove the front door panel on the Ford Focus second series, but also on the C-Max. First we open the front door and start by removing the triangular plastic cover of the speaker; after which we remove the armrest and the window control panel, levering the sides and disconnecting the electrical connector. At this point we unscrew the screws that we find below, using a socket wrench; we pry the sides of the panel to unhook and remove it, disconnecting the cable of the handle that we find on the back!


Posted on 15 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos