Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to clean the throttle body on Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta Fiesta 7, MK VII, MK 7 - Years 2017-2023
Part: Throttle body
Operation: How to clean the throttle body on Ford Fiesta

In this video tutorial we can see how to clean the Ford Fiesta throttle body. The first thing to do is to lift the bonnet and secure it; then you have to loosen the screws of the clamps that keep the throttle body connected to the air filter. On the suction collar you have to put a piece of paper in order not to drop anything inside. Before reassembling the throttle body, it is a good idea to clean the inside of the intake manifold to eliminate oil residues. To reassemble the throttle body, there is a small bush on the manifold that must be recessed inside (take a picture when you remove it to avoid mistakes). Once mounted you have to reconnect the connector. Carry out a road test.


Posted on 17 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos