Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the ECU of the Ford Ecosport?

Model: Ford Ecosport BK, MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Warning light – error code

See other generations:
Video tutorial

To reset the engine management ECU of the Ford Ecosport, open the bonnet to access the engine compartment. The ECU is located just below the windscreen, and you need to move the protective plastic cover to access it. Once removed, use a socket wrench to disconnect a cable connected to the ECU. Next, take two jump leads and connect the positive terminal of the car battery to the cable previously disconnected from the ECU. Allow the current to flow for a few seconds to reset the ECU, then reconnect the previously disconnected cable.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of a Ford Ecosport
How to Replace the Battery of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Thanks to today's tutorial, we can see all the steps necessary to replace the battery of our first-generation Ford Ecosport, produced from 2012 to 20…
How to Reset the Tyre Warning Light on the Ford EcoSport
How to Reset the Tyre Warning Light on the Ford EcoSport
Ford Ecosport (2012-2023 / BK, MK 1) Observe how simple it is to reset the tyre warning light on the Ford EcoSport, thanks to the guidance provided by the video presenter, who shows and …
How to Replace the Rear Drum Brake on a Ford Ecosport
How to Replace the Rear Drum Brake on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before starting, lift the rear end of your Ford Ecosport. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, unscrew and…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos