Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped/Full Beam Bulb on the Ford Kuga MK2

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Headlight bulb

In this video tutorial, you will see how to remove and replace the dipped and full beam bulb on the second series Ford Kuga, following these simple steps. First, open the bonnet of your car and start by removing the plastic protective cover of the bulbs, which is located behind the headlamp; then remove the bulb by disconnecting the electrical connector, as shown in the video. At this point, replace the bulb with the correct new one; insert it properly into the headlamp and reassemble everything!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) In this tutorial, you will see how to replace the main and dipped beam bulbs in the front headlight of a Ford Kuga. This is a very simple and quick o…
Where Are the Fuses Located in the Ford Kuga?
Where Are the Fuses Located in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) The fuses in the Ford Kuga are divided between two fuse boxes located within the vehicle: the first is found in the engine bay, protected by a specif…
Replacing Front Headlight Bulb on Kuga
Replacing Front Headlight Bulb on Kuga
Ford Kuga (2012-2019 / C520, MK 2) Let's see how to remove the headlight bulbs from a Ford Kuga. Lift the front bonnet of the car and secure it. Remove the inspection cap from the head…

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos