Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : How to replace the diesel pump on the Ford Focus 1.8 TDI first series

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Fuel pump
Operation: How to replace the diesel pump on the Ford Focus 1.8 TDI first series

To remove the diesel pump on our Ford Focus mK 1 first series. We must first access the rear of the car where we are going to remove the rear sofa and lift the underlying fabric. Here we will notice a slot where the Diesel Pump is located. With the help of a wrench we try to unscrew the bolts that keep it in place and pull it out of the seat in which it is located. Let's go now to remove the ring nut of our pump, to do this we can use a hammer and chisel to hit on the sides, (as shown in the video); or we can use the appropriate key that we can find on the market. Once removed, disconnect the fuel pipes and the electrical connector and extract the same, paying attention to the fuel residues; now let's replace it with the new one, reconnecting the connector and the fuel hoses.


Posted on 2 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How much does it cost to overhaul the Ford Focus diesel pump? Read Answer
    • Focus 2011-2018 - How much does it cost to replace the fuel pump on the Ford Focus 1.8 TDCi? Read Answer
    • Focus 2011-2018 - Where is the fuel pump of the Ford Focus 1.6 Tdci? Read Answer
    • Focus 2011-2018 - Where is the diesel pump located in the Ford Focus estate? Read Answer
    • Focus 2011-2018 - Where is the inertia switch on the Ford Focus 1.6? Read Answer
    • Focus 1998-2004 - Where is the 2000 Ford Focus fuel pump located? Read Answer
    • Focus 2011-2018 - Where is the fuel pump located in a diesel Ford Focus 1.8? Read Answer
    • Focus 2004-2011 - Where is the Ford Focus fuel pump located? Read Answer
    • Focus 2004-2011 - Where is the fuel float of the Ford Focus? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus float cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos