Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a Ford Fiesta MK6?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part:

If the third brake light bulb fails and needs replacing, follow the procedure shown in the attached video. Open the boot and, using a flat tool, preferably plastic to avoid damaging the surface, remove the two plastic caps near the brake light. Now, through these two holes, loosen the metal clips holding the light in place, using a flat screwdriver. Move to the front of the boot, remove the unit, disconnect the connector and the rubber tube for the washer. Finally, remove the plastic holder with the bulb and replace it with an equivalent, a W16W.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Light Bulb on a Ford Fiesta Mk6
How to Replace the Brake Light Bulb on a Ford Fiesta Mk6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If you want to replace the brake light bulb on your Ford Fiesta Mk6 (2008-2017) yourself, follow these steps. First, park the car safely and turn it …
Replacing Brake Light Bulb on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, you will see simple steps to remove and replace the brake light bulb on a Ford Fiesta. First, open the boot and remove the side screw from the…
How to replace the brake light bulb on a Ford Fiesta MK6.
How to replace the brake light bulb on a Ford Fiesta MK6.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's see how to replace the stop/position light bulb at the rear of the Ford Fiesta MK6: it is a dual filament bulb P21/5W. First, open the rear hat…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos