Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a Ford Fiesta Mk6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light bulb

If you want to replace the brake light bulb on your Ford Fiesta Mk6 (2008-2017) yourself, follow these steps. First, park the car safely and turn it off completely, then go to the rear boot and lift it fully. At this point, unscrew the two screws located at the top and bottom of the headlamp using a Torx T20 key, then remove the fabric cover and unscrew the safety screw as well. Finally, remove the entire headlamp and proceed to replace the faulty bulb with a new one.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Light Bulb on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, you will see simple steps to remove and replace the brake light bulb on a Ford Fiesta. First, open the boot and remove the side screw from the…
How to replace the brake light bulb on a Ford Fiesta MK6.
How to replace the brake light bulb on a Ford Fiesta MK6.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's see how to replace the stop/position light bulb at the rear of the Ford Fiesta MK6: it is a dual filament bulb P21/5W. First, open the rear hat…
How to Replace the Brake Light Bulb on a Ford Fiesta MK6?
How to Replace the Brake Light Bulb on a Ford Fiesta MK6?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If the third brake light bulb fails and needs replacing, follow the procedure shown in the attached video. Open the boot and, using a flat tool, pref…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos